How to Make Your own Thermal Paste

 :) Hello Freakz .... Today we would be talking about that compound that saves your CPU from.burning down due to over heating, the Thermal Paste.

The thermal paste is a very delicate compound which supports the heat sink that enables your PC to remain cool and not over heat to cause serious damage. 

This post is all about saving your cash and making your own thermal paste. If I might rate this procedure for me its easy but for the general aspect its at the moderate level. To start we need to know, what is the chemical make up of the thermal paste. We have three types of thermal paste :There are essentially three types of thermal

pastes:

Metal based

Ceramic based

Silicon based

all these high heat conductive paste that is used between two objects mostly the Processor and the Graphics card. Enough with the nerd talk let's go straight to making your own.

tools needed: tiny tea spoon a little mixing plate and the main ingredients Vaseline, Tooth paste and little powder. Here are the steps :

pore or squeeze out your desired amount of tooth paste (white tooth paste recommend with less fluorine) mix it up with a lesser amount of the Vaseline turn till you get a full mixture, you can see its getting thick making it capable of closing up the microscopic imperfections between the processor and the heat sink. Then u apply very little amount of the powder and there you have your own insulated thermal paste, it is recommended to always check after a week of application to correct imperfections . Next we talk about application of the thermal paste to heat sink.